Esge / Pletscher ebike rear triangle - stand for Haibike Fully

With this Esge / Pletscher stand for rear mounting, you can use the existing stand attachment on full-suspension Haibike S-Duro and X-Duro and park the e-bike safely.

The Esge / Pletscher rear stand fits perfectly to your Haibike eBike with full suspension. The rear end has a plastic cover on all these electric bike models, which can be easily clipped out from the inside.

Behind this cover, you'll find a machined profile to accommodate the stand.

What is the Esge - Pletscher rear stand suitable for?

• The Esge / Pletscher rear stand is suitable for all full-suspension Haibike eBikes with a hole spacing of 18 mm at its stand mount.
• On Haibike frames for Bosch Gen4 engines from 2020, an additional stand adapter is required. The mounting of this plate is done on the swingarm, behind the engine mount.
• Likewise, an adapter is required for Haibike FlyOn models.

How can I adjust the stand?

• The rear stand can be adjusted in length at the lower plastic foot with tools.
• The safe adjustment with tools protects against rattling.

How much weight does the stand carry?

• The Esge / Pletscher rear stand has a load capacity of 20 kg.
• How much weights on the stand in practice?

An example of the load capacity in practice:

A fully equipped trekking electric bike with a tare weight of about 27 kg, presses with about 7 kg support load on the stand. This load is mainly dependent on the set inclination of the eBike.

• The less lateral inclination the electric bike takes, the less load presses on the stand.
• An electric bike that stands too straight will be knocked over more quickly by the wind.
• Optimally, the eBike should be set with 10°-15° lateral inclination.

The technical details of the Esge / Pletscher rear stand for Haibike Fully: