Bosch Mounting Kit for PowerTube 750 Wh holder

Use the mounting kit to replace a defective or damaged holder on your Bosch PowerTube 750Wh battery. The holder of your PowerTube battery ensures secure mounting in your e-bike frame. The battery holder is only compatible with the Bosch Smart System and the corresponding PowerTube 750. The mounting kit is available in four versions. These differ on the one hand in the orientation of the PowerTube itself, horizontally or vertically, and on the other hand in the type of mounting in your e-bike.

Features of the Smart System mounting kit PowerTube

• Original Bosch spare part
• 100% precise fitting
• For mounting on your PowerTube battery
• For horizontal & vertical alignment
• For swivel mounting (pivot) & for slide-in mounting (axial)
• Only suitable for Bosch Smart System BES3

Which is the right mounting kit for my PowerTube 750Wh?

First find out which end of your PowerTube you need the mount for - cable side or lock side. Next, it is crucial how you mount your Intube battery in the e-bike. Either slide the battery into a closed down tube (axial) or open the down tube and swing the battery out (pivot). The last step is to choose between a horizontal or vertical alignment of your PowerTube (only relevant for the holder for slide-in mounting).

Versions & scope of delivery of the Bosch mounting kit for PowerTube 750Wh

• Mounting kit, lock side, for slide-in mounting axial, horizontal | Scope of delivery: Cover PowerTube axial horizontal; locking unit PowerTube axial (without locking cylinder); 2x screw 3.5x12, Torx T15; 2x screw M3x7
• Mounting kit, lock side, for insertion axial, vertical | Scope of delivery: Cover PowerTube axial vertical; Locking unit PowerTube axial (without locking cylinder); 2x screw 3.5x12, Torx T15; 2x screw M3x7
• Mounting kit, lock side, for Insertion pivot, horizontal & vertical | Scope of delivery: Locking unit (without locking cylinder), 2x screw M4x16
• Mounting kit, cable side, universal | Scope of delivery: plastic housing for cable, stiffening element, damping plate, 2x screw M4x16

Note: The axial version for insertion can also be used without battery lock. This allows you to remove the battery on tours without a key.

If you have any questions regarding compatibilty or availability, do not hesitate to contact us.