Brose external display cable for Wake-Up

Connect display and e-bike motor - with the extern Brose display cable Wake-Up. The connection cable is the communication line between the drive at the bottom bracket and your e-bike display on the handlebar. This means you always receive all the important information about your e-bike and your current riding. The Brose display cable can be easily replaced or renewed if necessary.

Features of the Brose display cable with external wake-up

• original Brose replacement cable
• connection of drive & display
• for e-bikes with wake-up directly at the battery
• 4-pin flat plug on the motor
• HIGO plug purple for display connection

How to recognise whether or not you need the Brose display cable with external wake-up function

Depending on the motor version, you will need a different display cable for your e-bike. If you have a Brose mid-motor with a 4-pin display connection, you will need this connection cable. In this case, the wake-up function for your e-bike is located directly on the battery. If, on the other hand, you can also wake up your battery via the display, the 5-pin Brose display cable is the right choice. If necessary, check your connections on the e-bike before ordering.