Bosch eBike drive unit mounting plate - Classic

The original aluminum mounting plate for mounting the Bosch Classic Line drive unit for all e-bikes from 2010 to 2013 or 2014.

The mounting plate is required if this is defective, for example, or should be replaced for optical reasons.

Mounting notice:

Please note that the drive unit mounting plate consists of 3 parts.

• 1x Bosch Classic eBike mounting plate
• 2x Bosch M6x20 - T30 Torx screws
• 3x Bosch M8 expansion sleeves - Torx T40

The expansion sleeves expand during the assembly of the drive unit and must be replaced after disassembly. If you use the old expansion sleeves again, there is a risk of breakage and thus an increased risk of accidents.